LUNA™ go Manual

Getting started

Congratulations on taking the first step towards flawlessly beautiful skin anytime, anywhere by acquiring the LUNA™ go T-Sonic™ facial-cleansing and anti-aging massage. Before you begin to enjoy all the benefits of sophisticated skincare technology whenever you want without compromise, please take a few moments to carefully read the instructions in this manual.

Please READ ALL INSTRUCTIONS BEFORE USE and utilize this device only for its intended use as described in this manual.

WARNING: NO MODIFICATION OF THIS EQUIPMENT IS ALLOWED.

LUNA™ go overview

Our small yet groundbreaking new skincare system will leave the skin looking naturally beautiful and radiant, as well as smoother and younger.

Used as part of your daily cleansing routine, the LUNA™ go’s Cleansing Mode channels T-Sonic™ pulsations to provide a much deeper clean than washing by hand, enhancing the absorption of your favorite skincare products. In Firming Massage Mode, LUNA™ go works by gently massaging lower-frequency pulsations on wrinkle-prone areas to help diminish the visible signs of aging. Regular use not only promises a fresher, more radiant complexion right from the start, it also lays the foundation for a lifetime of younger-, healthier-looking skin.

1. Cleansing Brush Surface

2. Massaging Surface

3. 1-Button Interface

4. Waterproof Charging Port

How to use LUNA™ go

LUNA™ go is available in 4 different models for a more personalized cleansing experience, each with a cleansing brush that suits normal, combination, sensitive or oily skin types with the strategic graduation of thinner to thicker touch-points to gently or strongly cleanse the skin depending on its needs. To maximize the skincare benefits of LUNA™ go, we suggest you use it for 2 minutes each morning and evening.

MODE SELECT

1. Press the center button once to turn on your LUNA™ go. When activated, it will be in Cleansing Mode.
2 .Press the center button again to put the device on Standby (on Standby, the indicator will emit a steady glow and the pulsations will stop, giving you the chance to rinse your face).
3. Press the center button a third time to activate the Firming Massage Mode.
4. Press the center button once more to deactivate your LUNA™ go.

The individual stages of FOREO’s cleansing and firming massage routines are described below. After each stage of these routines, you will feel the T-Sonic™ pulsations momentarily pause and see the indicator light flash, prompting you to move on to the next area of your face.

CLEANSING MODE

The LUNA™ go’s Cleansing Mode removes 99.5% of dirt and oil*, as well as makeup residue and dead skin cells

1. APPLY CLEANSER

Remove all makeup, wet the LUNA™ go then dampen your face and apply your regular cleansing product. Turn on your LUNA™ go by pressing the center button once, activating the Cleansing Mode.

2. CLEANSE THE FOLLOWING ZONES:

Every 15 seconds pulsations will pause to indicate when to cleanse a new zone.

Massage your chin and cheek using circular movements and repeat on the other side.
Starting from the center, massage your forehead with gentle outward circular strokes.
Massage the nose by gliding up and down one side, then the other. Delicately massage the under-eye region using outward strokes.

After 1 minute, the pulsations will pause 3 times, indicating the end of the cleansing routine. Press the center button once more to put the LUNA™ go on Standby.

3. RINSE

Rinse and dry your face to complete the 1-minute cleansing routine. Then, apply your favorite skincare products, if any.

FIRMING MASSAGE MODE

The LUNA™ go’s Firming Massage Mode diminishes the appearance of fine lines and wrinkles, and leaves the skin looking firmer and more elastic.

From Standby, press the center button to activate the Firming Massage. Try spending around 12 seconds on each stage of the routine; after this interval the LUNA™ go’s pulsations will pause momentarily. Relax your face and press the LUNA™ go’s massage surface to the following wrinkle-prone areas, where muscle tension can cause worry lines, crow’s feet and laugh lines:

1. Region between the eyebrows
2. Right temple
3. Right nasolabial fold
4. Left nasolabial fold
5. Left temple

After 1 minute, you will feel the pulsations pause 3 times in quick succession, indicating the end of the firming massage.

Please note that to prevent overuse, the LUNA™ go will automatically switch itself off if left for 3 minutes in Cleansing or Firming Massage Mode.

CAUTION: If you experience any discomfort when using your FOREO device, discontinue use immediately and consult a physician.

*Based on clinical tests, results on file.

Cleaning you LUNA™ go

Always clean your device thoroughly after use. Wash the brush surface with water and soap, then rinse with warm water. Avoid using clay-based, silicone-based or grainy cleansers, exfoliators or scrubs, as they may damage the device's soft silicone touchpoints. Pat dry with a lint-free cloth or towel. After use, we recommend spraying the device with FOREO Silicone Cleaning Spray and rinsing with warm water for optimal results.

NOTE: Never use cleaning products containing alcohol, petrol or acetone, as they may irritate the skin and damage the silicone.

CHARGING

Your FOREO device is rechargeable with its included charger. One hour of charging delivers a full charge which lasts for up to 1 month which lasts for up to 60 uses.

Insert the DC connector into the LUNA™ go’s charging port
Insert the mains plug into a charging point. The LUNA™ go’s LED indicator will flash repeatedly to indicate the battery is charging. When it is fully charged (after approximately 1 hour), the LED indicator will emit a steady glow for 3 minutes. After that, it will start blinking again.
When the battery is running low, the LED indicator on your LUNA™ go will emit a blinking white light.

CAUTION: Before charging, make sure the charging port and charger are free from water and cleanser residue. Do not charge the LUNA™ go in any location where it or the charger may become immersed in water. Do NOT use your FOREO device while charging and do NOT charge your LUNA™ go for more than 1 hour. Only use the FOREO-provided charger.

Safety & troubleshooting

IMPORTANT
FOR OPTIMUM SAFETY

Avoid using clay-based, silicone-based or grainy cleansers, exfoliators or scrubs, as they may damage the LUNA™ go’s soft silicone touch-points.
If you have a skin condition or any medical concerns, please consult a dermatologist before use.
Cleansing with the LUNA™ go should be comfortable – if you experience discomfort, discontinue use immediately and consult a physician.
Exercise particular care when cleansing the under-eye regions and do not bring the device into contact with the eyelids or eyes themselves.
For reasons of hygiene, we do not recommend sharing your LUNA™ go with anyone else.
Avoid leaving your LUNA™ go in direct sunlight and never expose it to extreme heat or boiling water.
Close supervision is necessary when this device is used by, on, or near children, as well as those with reduced physical and mental abilities.
Never use the device or charger if they are damaged, and only use the charger supplied by FOREO with the device.
Discontinue use if this product appears damaged in any way. This product contains no serviceable parts.
To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth.
Given the efficiency of the FOREO cleansing and firming massage routines, we recommend that you do not use the LUNA™ go’s Cleansing or Firming Massage Modes for more than 3 minutes at a time.
Use this device only for its intended use as described in this manual.

TROUBLESHOOTING

LED does not pulse when charger is connected?

Battery is fully charged, ready for up to 60 full cleansing and firming routines.
Battery is drained and will require several minutes to acknowledge charging cable.
Charging cable is not properly connected. Check wall socket and charging port

The LUNA™ go does not activate when the center button is pressed?

Battery is empty. Recharge your LUNA™ go.

The LUNA™ go cannot be switched off and/or interface buttons do not respond?

Microprocessor is temporarily malfunctioning. Connect the charging cable to restore function to normal.

The LUNA™ go's silicone surfaces have degraded to a sticky or bubbly texture?

Discontinue use. Silicone is highly durable, but degrades under certain conditions – consult this manual’s Cleaning and Safety sections for how to prevent this

If you do not find the answer to your specific question in the troubleshooting section, or if you have any other questions regarding the device’s operation, please visit the Customer Care section of www.foreo.com.

Disposal & battery removal

Disposal information

Disposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems).

The crossed-out dustbin symbol indicates that this device should not be treated as household waste, but rather be brought to the appropriate collection point for recycling of electrical and electronic equipment. By ensuring this device is disposed of correctly, you will help prevent the potential negative consequences for the environment and human health which could be caused by inappropriate waste handling of the product. The recycling of materials will also help conserve natural resources.

For more information about the recycling of your device, please contact your local household waste disposal service or your place of purchase.

Specifications

MATERIALS:

Body-safe silicone & ABS

COLOR:

Pink (normal skin)/Blue (combination skin)/Turquoise (oily skin)/Lavender (sensitive skin)

SIZE:

50 x 50 mm

WEIGHT:

42.7 g

BATTERY:

Li-ion 70 mAh

USAGE:

up to 60 uses

STANDBY:

100 days

FREQUENCY:

125 Hz

MAX NOISE LEVEL:

<63 dB

INTERFACE:

1 button

DISCLAIMER: Users of this device do so at their own risk. Neither FOREO nor its retailers assume any responsibility or liability for any injuries or damages, physical or otherwise, resulting, directly or indirectly, from the use of this device. Further, FOREO reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.

Model may be changed for improvements without notice.